Showing posts with label of. Show all posts
Showing posts with label of. Show all posts
Saturday, February 28, 2015
Laptop Dell Vostro 3500 turns itself off without prior notification because of system becoming too warm
One day my wifes Dell Vostro 3500 Laptops started to turn itself off when in use without any warning message or notification. Turning it on again it worked for a while an then powered off again without any hint where the problem may be caused by.
How-i-fixed-it:
I turned out to be caused by the fan assembly air outlet being full of dust so that no air was going through it any more to cool down the system. To get to it to clean it means disassembling the whole system but following the procedure well described in the service Manual under "
Removing the Heat Sink and Fan Assembly",
it took me about an hour to get the job done and since that, the system is running fine again.
Heres the link to the Dell Vostro 3500 Service Manual:
ftp://ftp.dell.com/Manuals/all-products/esuprt_laptop/esuprt_vostro_notebook/vostro-3500_service%20manual_en-us.pdf
Update: Had to clean it again Apr. 2014. Seems like it need yearly maintenance... Here are some images how the fan assembly looked like:


Read more »
How-i-fixed-it:
I turned out to be caused by the fan assembly air outlet being full of dust so that no air was going through it any more to cool down the system. To get to it to clean it means disassembling the whole system but following the procedure well described in the service Manual under "
Removing the Heat Sink and Fan Assembly",
it took me about an hour to get the job done and since that, the system is running fine again.
Heres the link to the Dell Vostro 3500 Service Manual:
ftp://ftp.dell.com/Manuals/all-products/esuprt_laptop/esuprt_vostro_notebook/vostro-3500_service%20manual_en-us.pdf
Update: Had to clean it again Apr. 2014. Seems like it need yearly maintenance... Here are some images how the fan assembly looked like:


VW up! maps and more NAVIGON 7 10 25 CB1100 update error because of low memory
Today I tried to update my VW up! maps + more System to Software Version 7.10.25. Navigon Fresh told me, theres not enough space free in the built-in memory to make the update (Error CB1100). Heres how the error looks like:

The issue is also discussed in the upownersclub:
http://www.upownersclub.co.uk/forum/navigon-software-update-710_topic2759_page2.html
and german the up-szene.de
http://www.up-szene.de/forum/viewthread.php?thread_id=457.
and the danish VAGcars.dk
http://www.vagcars.dk/phpbb/viewtopic.php?f=2&t=54243&start=2820
and the german motor-talk.de
http://www.motor-talk.de/forum/maps-more-update-dezember-2012-probleme-t4350892.html
and in the netherlands
http://www.vwupforum.nl/viewtopic.php?f=8&t=1508&p=25167&hilit=update#p25167
and in upsociety.de
http://www.upsociety.de/index.php?page=Thread&threadID=149&s=bea86988b2710f377153f9496e9560edf7a09a31
and briskoda.net
http://www.briskoda.net/forums/topic/261824-move-fun-pid-update-71025-problemsolved/
Looking through the boards, the problem also seems to affect the Skoda Citigo Move & Fun. I did not find entries that its also affecting the SEAT Portable so far, but since its the same hardware it may be.
How-I-fixed-It:
Theres no real "fix" for this so far, just a workaround using an USB-Stick as temporary memory (Thanks to user nightbow in the upownersclub):
- You need an empty usb stick with 4GB or more.
- Copy all data from the navi on the stick.
- Deduct the navi from usb.
- Start the program navigon fresh and start the update!
- Software is updated on the USB stick now
- Finish navigon fresh
- Then naviagate on the usb stick to the folder NAVIGON map and delete some of the maps you dont need
- Connect the navi again and delete everything on it
- Copy all data from the stick on the navi andconnect it to the car
German / Deutsch (Danke an user CitiGo) im up-szene.de Forum:
- Die kompletten Daten vom internen Speicher auf den USB-Stick kopieren.
- M&M vom PC trennen.
- Navigon Fresh starten
- Der USB-Stick sollte jetzt als M&M erkannt werden
- Update starten
- Achtung: der Stick wird nach fertigstellung nicht mehr von Navigon Fresh erkannt
- Nach fertigstellung des Updates Navigon Fresh wieder beenden.
- Nicht benötigte Karten (xxxx.map) vom USB-Stick löschen. (NAVIGON->map)
- M&M wieder mit dem PC verbinden und den gesamten internen Speicher löschen.
- Den kompletten Inhalt des USB-Stick auf das M&M kopieren
- M&M vom PC trennen -> das M&M sollte jetz neu booten
- M&M mit dem Auto verbinden
Heres a little update this:
- Navigon Support told me to buy a 4 GB SD-Card to increase the device memory. But they were not able to tell me so far, whether the card has to stay always in the slot or not. So Ill not gonna buy anything before this is clear.
- User telephoneman in the motor-talk.de-Forum wrote, he got told by the Navigon Support to send it to them to get it replaced. According to Navigon this is a known issue!
Anyway.
- Today i contacted VW support directly on their free german support number 0800-8655792436 and a very friendly woman told me shell forward my request to the responsible people inside VW. She told me theyll get back to me within a day or two.
Heres the next update:
- The Lady called me back and said, since its a third-party product, I have to get this sorted out with Navigon directly. I should also see my local VW dealer to see, if they can help me there.
I got a new mail from the Navigon Support:
- If i use a SD-Card with no more than 4GB, than the device will store some of the data on this card. The Card then has to be ALWAYS in the device for it to work and they do not recommend storing Music on the Card
(In my words: If I do it like this, I will not be able to Play Music from th e SD Card any more.)
In the end they told me to talk to my VW dealer since hes responsible to handle this issue from their Point of view.
Latest update:
My VW dealer ordered a new Maps&More device for me. The new one does not show the issue.
Read more »

http://www.upownersclub.co.uk/forum/navigon-software-update-710_topic2759_page2.html
and german the up-szene.de
http://www.up-szene.de/forum/viewthread.php?thread_id=457.
and the danish VAGcars.dk
http://www.vagcars.dk/phpbb/viewtopic.php?f=2&t=54243&start=2820
and the german motor-talk.de
http://www.motor-talk.de/forum/maps-more-update-dezember-2012-probleme-t4350892.html
and in the netherlands
http://www.vwupforum.nl/viewtopic.php?f=8&t=1508&p=25167&hilit=update#p25167
and in upsociety.de
http://www.upsociety.de/index.php?page=Thread&threadID=149&s=bea86988b2710f377153f9496e9560edf7a09a31
and briskoda.net
http://www.briskoda.net/forums/topic/261824-move-fun-pid-update-71025-problemsolved/
Looking through the boards, the problem also seems to affect the Skoda Citigo Move & Fun. I did not find entries that its also affecting the SEAT Portable so far, but since its the same hardware it may be.
How-I-fixed-It:
Theres no real "fix" for this so far, just a workaround using an USB-Stick as temporary memory (Thanks to user nightbow in the upownersclub):
- You need an empty usb stick with 4GB or more.
- Copy all data from the navi on the stick.
- Deduct the navi from usb.
- Start the program navigon fresh and start the update!
- Software is updated on the USB stick now
- Finish navigon fresh
- Then naviagate on the usb stick to the folder NAVIGON map and delete some of the maps you dont need
- Connect the navi again and delete everything on it
- Copy all data from the stick on the navi andconnect it to the car
German / Deutsch (Danke an user CitiGo) im up-szene.de Forum:
- Die kompletten Daten vom internen Speicher auf den USB-Stick kopieren.
- M&M vom PC trennen.
- Navigon Fresh starten
- Der USB-Stick sollte jetzt als M&M erkannt werden
- Update starten
- Achtung: der Stick wird nach fertigstellung nicht mehr von Navigon Fresh erkannt
- Nach fertigstellung des Updates Navigon Fresh wieder beenden.
- Nicht benötigte Karten (xxxx.map) vom USB-Stick löschen. (NAVIGON->map)
- M&M wieder mit dem PC verbinden und den gesamten internen Speicher löschen.
- Den kompletten Inhalt des USB-Stick auf das M&M kopieren
- M&M vom PC trennen -> das M&M sollte jetz neu booten
- M&M mit dem Auto verbinden
Heres a little update this:
- Navigon Support told me to buy a 4 GB SD-Card to increase the device memory. But they were not able to tell me so far, whether the card has to stay always in the slot or not. So Ill not gonna buy anything before this is clear.
- User telephoneman in the motor-talk.de-Forum wrote, he got told by the Navigon Support to send it to them to get it replaced. According to Navigon this is a known issue!
Anyway.
- Today i contacted VW support directly on their free german support number 0800-8655792436 and a very friendly woman told me shell forward my request to the responsible people inside VW. She told me theyll get back to me within a day or two.
Heres the next update:
- The Lady called me back and said, since its a third-party product, I have to get this sorted out with Navigon directly. I should also see my local VW dealer to see, if they can help me there.
I got a new mail from the Navigon Support:
- If i use a SD-Card with no more than 4GB, than the device will store some of the data on this card. The Card then has to be ALWAYS in the device for it to work and they do not recommend storing Music on the Card
(In my words: If I do it like this, I will not be able to Play Music from th e SD Card any more.)
In the end they told me to talk to my VW dealer since hes responsible to handle this issue from their Point of view.
Latest update:
My VW dealer ordered a new Maps&More device for me. The new one does not show the issue.
Friday, February 27, 2015
Unattended Installation of Microsoft Fax Services
Today I setup a Fax Server on Microsoft Server 2003 and need to create a SMS 2003 package to setup all the XP workstations to install Fax Services and then install the network fax printer.
My examples can be downloaded here: http://www.cadjobs.net/blog/add-fax.zip
My first problem was to change the install path for XP so that when the fax services installed that it would not request that the user install the XP CD into the CD-ROM. I added UNC path to a share where I have the XP SP2 i386 files into the registry to fix that problem. Here is the location of that key:
HKEY_LOCAL_MACHINE
Key=SOFTWAREMicrosoftWindowsCurrentVersionSetup
New Value=\datamsixp
Value Name=SourcePath
Then I created an SMS Package (the SMS installer script is included in the above zip file) that started the Fax Services installer and then installed the network printer after that. Here are the details:
This installs the Fax Services.
SYSOCMGR.EXE /i:%windir%infsysoc.inf /u:%temp%install-fax.txt
Make sure that a file called install-fax.txt is in the %temp% directory and it should contain this:
[Components]
Fax=On
This installs the Network Fax if you have one setup.
rundll32 printui.dll,PrintUIEntry /in /n\serverfax
Read more »
My examples can be downloaded here: http://www.cadjobs.net/blog/add-fax.zip
My first problem was to change the install path for XP so that when the fax services installed that it would not request that the user install the XP CD into the CD-ROM. I added UNC path to a share where I have the XP SP2 i386 files into the registry to fix that problem. Here is the location of that key:
HKEY_LOCAL_MACHINE
Key=SOFTWAREMicrosoftWindowsCurrentVersionSetup
New Value=\datamsixp
Value Name=SourcePath
Then I created an SMS Package (the SMS installer script is included in the above zip file) that started the Fax Services installer and then installed the network printer after that. Here are the details:
This installs the Fax Services.
SYSOCMGR.EXE /i:%windir%infsysoc.inf /u:%temp%install-fax.txt
Make sure that a file called install-fax.txt is in the %temp% directory and it should contain this:
[Components]
Fax=On
This installs the Network Fax if you have one setup.
rundll32 printui.dll,PrintUIEntry /in /n\serverfax
Labels:
fax,
installation,
microsoft,
of,
services,
unattended
Subscribe to:
Posts (Atom)