Monday, March 2, 2015
HOW TO FIX IPHONE5 WIFI NOT WORKING ISSUE
With the release of new Iphone 5 and 5s User are now facing multiple issue over WiFi connectivity and usage. The fix seems to majorly a network security setting.There are reports where iPhone 5 users are getting slow speeds on connected to Wi-Fi.
If your iphone5 or 5s is not able to find out a Wi-Fi network or loosing WiFI signal strength , please try to do following troubleshooting steps.
Reset the network setting: Go to Setting -> Wi-Fi to choose available network, if you can’t find any network, you can get close to the wireless router to try again. Even this still don’t work , reset the network setting by going to Settings > General > Reset > Reset Network Settings.

Verify Wifi Network for iphone:
Please verity that your Wifi is up and password is also correct, for the passwords c. If everything is OK ,but if you are not able to connect the Wifi from your iPhone 5S or 5, to fix this Wifi problem by going to General > Rest > Reset Network Settings
Please verity that your Wifi is up and password is also correct, for the passwords c. If everything is OK ,but if you are not able to connect the Wifi from your iPhone 5S or 5, to fix this Wifi problem by going to General > Rest > Reset Network Settings
1. Try to put Manual DNS: . To do that go to Settings -> Wi-Fi and touch the blue arrow presend in front of connected Wi-Fi network. Press DNS and enter Google DNS server address it can be either 8.8.4.4 or 8.8.8.8.
2. Router Security setting change : It seemed to help many user. Router security system can be an issue. It can be that WPA2 W-Fi security is causing the problem. In that case Switch to WEP security or removing password security can remove Wi-Fi speeds and connectivity issues.
Please let me know if it worked for you.Sunday, March 1, 2015
Computer Motherboard Components And Their Functions
Motherboard, or often we know the name mainboard, mobo, MB, or the system board is a hardware device in a computer system in the form of printed circuit board (PCB).
Its function is to connect all components of a computer. The motherboard can be regarded as the backbone (backbone) of the computer system, all components must have a computer connected to the motherboard, either directly or indirectly.
Motherboards are produced in a variety of sizes, some are made specifically for the brand of a particular system. However, most modern mobo ready made to be plugged into a wide variety of casing sizes. Mobo installed inside the casing with the facing side of the casing is easy to open, and tightened with a screw.
And this is Some functions motherboard and components :
- Socket processor. That is a place for use to place or take processor, either system socket. There is a system placing processor for Pentium processor in the past. That is slot system. Like placement for processor P3500 and the previous generation. But not all processor P3500 use this SLOT System. To all advanced processor they using placement slot system. You must notice when placing processors are. We must pay attention to compatibility processor of all pins with socket existing. Because, if there are component not matches. It will result a fatal error, like pin processors will be broke.
- Socket memory RAM, Function of memory socket is to put memory RAM on the motherboard. There are many kind of shape in memory socket. It adjusted with any type of memory that will be installed. Like when use the 2-PINNED-RAM. For SD RAM or DIMM use 168 PIN and for DDR use 184 and there also socket line DDR2 and DD3 used by mother board today.
- socket floppy. This socket for connect the motherboard with floppy disk drive. Which use for insert floppy disk.
- Socket IDE. Socket IDE it’s using for connecting cable between the mother board with hard disk and CD Drive.
- Socket SATA. Just like socket IDE. Socket SATA use for HDD, DVD ROM, and SSD, but its have higher transfer rate than IDE Socket.
- Slot AGP, accelerated graphics port (AGP) its use for transmit data from graphics to processor without going through main memory. So, this can speed up the process of data management graphics. Most motherboard today has AGP 4x bus than can operate at a frequency of 266 MHz
- PCI Express. Like AGP Slot which use for as transfer data like picture to monitor. Design to replace AGP and PCI. PCI Express have faster data transfer, especially for 3D graphics.
Labels:
and,
components,
computer,
functions,
motherboard,
their
How to create fillable PDF forms without Adobe Acrobat Ausfüllbare PDF Formulare ohne Adobe Acrobat erstellen
I was looking for a way to create fillable PDF forms for free / with open source Software without the need to buy Adobe Acrobat Software.
How-I-fixed-it:
I found the right hints here:
http://www.urz.uni-heidelberg.de/ausbildung/dokumentation/pdfformulare.html
and here
https://danilop.wordpress.com/2008/07/02/how-to-create-pdf-forms-with-openoffice/
It can be done by either using OpenOffice or by using Latex.
Here are some sample LaTeX documents:
http://tex.stackexchange.com/questions/29842/save-fillable-forms
http://texwelt.de/wissen/fragen/7768/wie-erstelle-ich-ein-gutes-ausfullbares-pdf-Formular
LaTeX documents can be edited and compiled to PDF with many different free Tools, e.g. TeXStudio: http://texstudio.sourceforge.net/
Read more »
How-I-fixed-it:
I found the right hints here:
http://www.urz.uni-heidelberg.de/ausbildung/dokumentation/pdfformulare.html
and here
https://danilop.wordpress.com/2008/07/02/how-to-create-pdf-forms-with-openoffice/
It can be done by either using OpenOffice or by using Latex.
Here are some sample LaTeX documents:
http://tex.stackexchange.com/questions/29842/save-fillable-forms
http://texwelt.de/wissen/fragen/7768/wie-erstelle-ich-ein-gutes-ausfullbares-pdf-Formular
LaTeX documents can be edited and compiled to PDF with many different free Tools, e.g. TeXStudio: http://texstudio.sourceforge.net/
How to access data in nested structures in matlab
I got a Matlab-File that has data in nested structures. I was wondering, how to access particular fiels by using indices.
I found some information here;
http://www.mathworks.de/de/help/matlab/matlab_prog/access-data-in-nested-structures.html
Finally i found out, that i have to use the curly brackets to access a field in a nested Array.
Example:
imshow(groundTruth{1,1}.Segmentation==3)
(groundTruth itself contains an array of structs)
Read more »
I found some information here;
http://www.mathworks.de/de/help/matlab/matlab_prog/access-data-in-nested-structures.html
Finally i found out, that i have to use the curly brackets to access a field in a nested Array.
Example:
imshow(groundTruth{1,1}.Segmentation==3)
(groundTruth itself contains an array of structs)
How to disable all animations in a PowerPoint presentation How to advance slides manually Präsentation ohne Animationen anzeigen
Today i was asked, how to disable all animations in a PowerPoint presentation and how to manually change slides.
The presentation had some timings set up to automatically switch slides after some time and i wanted to disable this.
How-I-fixed-it:
I found the right hints here: http://www.worldstart.com/disable-animations-in-powerpoint/
Go to "Set up show". Under "Options" check "Presentation without Animation" and unter "Advance slides" select "Manually"
Heres the screenshot of the german Version "Bildschirmpräsentation einrichten", "Präsentation ohne Animation", "Nächste Folie Manuell"


Read more »
The presentation had some timings set up to automatically switch slides after some time and i wanted to disable this.
How-I-fixed-it:
I found the right hints here: http://www.worldstart.com/disable-animations-in-powerpoint/
Go to "Set up show". Under "Options" check "Presentation without Animation" and unter "Advance slides" select "Manually"
Heres the screenshot of the german Version "Bildschirmpräsentation einrichten", "Präsentation ohne Animation", "Nächste Folie Manuell"

Heres the screenshot of the english Version "Set Up Show", "Show without Animation", "Advance Slides manually".

Image source: http://www.worldstart.com/disable-animations-in-powerpoint/
Labels:
a,
advance,
all,
animationen,
animations,
anzeigen,
disable,
how,
in,
manually,
ohne,
powerpoint,
präsentation,
presentation,
slides,
to
Infor Visual Enterprise Macros
Here are some macro information for Visual Enterprise.
Macros are basically vbscript and you can get more help from the Infor website.
Here are three examples that we use all the time.
This one takes the packlist from the shipping window and sends it to Microsoft SQL reporting services to create a report in PDF format.
Filename: VMSHPENT_Print Cert.vms
Dim ie,ss
sub pause(secs)
start = now
secs = cint(secs)
while datediff("s",start,now) < secs: wend
end sub
set ie = CreateObject("InternetExplorer.Application")
ie.Navigate "http://sharepoint/reportserver?%2fVisual+Enterprise+Shop+Reports%2fSkills+Cert+for+Laser+Printers&rs:Command=Render&rs:Format=PDF&PACKLIST=" & PACKLIST_ID
ie.Height = 50
ie.Width = 500
ie.Visible = false
pause 4
Set ss = CreateObject("WScript.Shell")
ss.AppActivate "File Download"
ss.sendkeys "%o"
Im sorry if this blog chops some of this into more than one line.
Make sure the ie.Navigate is one line and then the next line is ie.Height = 50.
This next one just enters some data into a box for you.
Thats right, just one line!
filename: VMMFGWIN_Submitted to Vendor.vms
udfString1 = "Submitted to Vendor"
This one goes into a database and pulls some information about the customer and enters it into a box for you.
filename: VMORDENT_Fill in product code.vms
Dim SQLString
Const DB_CONNECT_STRING = "Provider=SQLOLEDB.1;Data Source=MYSERVER; Initial Catalog=MYDATABASE;User Id=macro;Password=somereadonlypassword"
Set MyDB = CreateObject("ADODB.Connection")
MyDB.Open(DB_CONNECT_STRING)
SQLString = "select USER_9 FROM CUSTOMER WHERE (ID = " & CUSTOMER_ID & ")"
set rsSystemName = MyDB.Execute(SQLString)
GetPC = rsSystemName.Fields("User_9")
MyDB.Close
Set OrderLns = LINES.Value
For i = 0 to OrderLns.Count -1
Set OrderLn = OrderLns(i)
sOrderLn = OrderLn("LINE_NO")
If OrderLn("PRODUCT_CODE")="" Then
OrderLn("PRODUCT_CODE")= GetPC
End If
Next
Set OrderLn = Nothing
Set OrderLns = Nothing
Read more »
Macros are basically vbscript and you can get more help from the Infor website.
Here are three examples that we use all the time.
This one takes the packlist from the shipping window and sends it to Microsoft SQL reporting services to create a report in PDF format.
Filename: VMSHPENT_Print Cert.vms
Dim ie,ss
sub pause(secs)
start = now
secs = cint(secs)
while datediff("s",start,now) < secs: wend
end sub
set ie = CreateObject("InternetExplorer.Application")
ie.Navigate "http://sharepoint/reportserver?%2fVisual+Enterprise+Shop+Reports%2fSkills+Cert+for+Laser+Printers&rs:Command=Render&rs:Format=PDF&PACKLIST=" & PACKLIST_ID
ie.Height = 50
ie.Width = 500
ie.Visible = false
pause 4
Set ss = CreateObject("WScript.Shell")
ss.AppActivate "File Download"
ss.sendkeys "%o"
Im sorry if this blog chops some of this into more than one line.
Make sure the ie.Navigate is one line and then the next line is ie.Height = 50.
This next one just enters some data into a box for you.
Thats right, just one line!
filename: VMMFGWIN_Submitted to Vendor.vms
udfString1 = "Submitted to Vendor"
This one goes into a database and pulls some information about the customer and enters it into a box for you.
filename: VMORDENT_Fill in product code.vms
Dim SQLString
Const DB_CONNECT_STRING = "Provider=SQLOLEDB.1;Data Source=MYSERVER; Initial Catalog=MYDATABASE;User Id=macro;Password=somereadonlypassword"
Set MyDB = CreateObject("ADODB.Connection")
MyDB.Open(DB_CONNECT_STRING)
SQLString = "select USER_9 FROM CUSTOMER WHERE (ID = " & CUSTOMER_ID & ")"
set rsSystemName = MyDB.Execute(SQLString)
GetPC = rsSystemName.Fields("User_9")
MyDB.Close
Set OrderLns = LINES.Value
For i = 0 to OrderLns.Count -1
Set OrderLn = OrderLns(i)
sOrderLn = OrderLn("LINE_NO")
If OrderLn("PRODUCT_CODE")="" Then
OrderLn("PRODUCT_CODE")= GetPC
End If
Next
Set OrderLn = Nothing
Set OrderLns = Nothing
SQLCLR error Assembly in host store has a different signature than assembly in GAC Exception from HRESULT 0x80131050
I was referencing the "System.Drawing" DLL (Version 2.0.0.0) in my SQLCLR Assembly Project.
It was running fine for ages on the Server until i deployed a new version of my Assembly to it today:
Error message when you execute a CLR routine or use an assembly in SQL Server: "Assembly in host store has a different signature than assembly in GAC. (Exception from HRESULT: 0x80131050)"
How-i-fixed-it:
I was able to fix my problem by executing this T-SQL command on my database:
Alter Assembly [System.Drawing]
From C:WindowsMicrosoft.NETFrameworkv2.0.50727System.Drawing.dll
The issue is also discussed here:
http://social.technet.microsoft.com/Forums/sqlserver/en-US/17df0715-7608-480d-8ad6-78dcf6c9d43a/different-version-in-gac-and-SQL
Link to Microsoft Knowledge Base Article:
http://support.microsoft.com/kb/949080
Subscribe to:
Posts (Atom)